OPEBM6S | AC/R Moisture Remover

Optima® eBOOST™ Moisture Remover

eBOOST™ AC/R Moisture Remover is a dehydrating additive that eliminates moisture and prevents water molecules from forming in AC/R systems. 
Safe for all systems and compatible with all AB, mineral, POE and PAG oils. Will not break down or leave behind any type of particulate matter, acids, 
gels or polymers.

ADDITIONAL BENEFITS

• Eliminates system moisture
• Compatible with lubricants and all refrigerant gases – including CFC, HFC and HCFC
• Treats up to 6 tons
• Safe and effective for all systems
• Does not contain methanol or solid particles
• Packaged in sealed trilingual (English, French and Spanish) clamshell with hang tab, color insert card and instructions

Availability

Instructions for Use

1. Turn AC/R system on and set to lowest temperature.
2. Hold syringe end upright and unscrew (remove) blue cap.
3. Select a ¼” hose (black o –ring) or 5/16” hose (green o-ring).
4. Attach threaded end of hose to syringe.
5. Gently push plunger and fill clear hose with solution (to displace all air from hose).
6. Connect hose to system low pressure service port and inject 100% of solution.
7. Disconnect hose/syringe from system and discard.
8. Continue to run system for 30 minutes.