Silent+ Mini Lime

Tags: silent+, silent+ mini lime, mini lime, aspen pumps

Silent+ Mini Lime

The next generation Silent+ Mini Lime has an anti-vibration damper and built-in sound absorbing materials. As well
as a quick release reservoir, you can also commission the pump on site, and check operation via the LED system in
the reservoir.

Max. flow: 12L/h
Max. rec. head: 10m (flow rate 6L/h)
Sound level: 20dB(A) @ 1m

Description

Key Features

Anti-vibration damper
Pump sits in trunking elbow
LEDs provide visual operating feedback

Suitability

Up to 16kW / 54,000Btu/h
High wall split systems
Left or right install with range of trunking systems
Perfect for... Commercial use where silence is important

In The Box

Silent+ Mini Lime pump (including 1.5m hard wired power cable)
Anti-vibration pulse damper, anti-siphon device & 500mm discharge tube assembly
500mm Lime green inlet hose 14mm ID
40mm Vinyl breather tube 6mm ID
Elbow front and back
800mm Conduit front and back
Internal conduit sleeve (Slimline system only)
Gasket (Slimline, Speediduct and Inoac systems only)
Ceiling plate
Drain connector kit
Fixing kit
Install manual

Specifications

Data Based				        @ 230 VAC 50Hz

Max. flow					12L/h

Max. rec. head				10m

dB(A)					        20 (Assuming solid wall construction with a 2kW unit)

Power supply				230 VAC, 0.1A, 16W, 50/60Hz

Rated					        Non continuous

Class					        II appliance

Max. unit output				16kW / 54,000Btu/h

Max. water temp				40°C / 104°F

Discharge tube				6mm ID

IP Protection				IP24

Safety switch				5.0A N.C. / N.O. (5.0A volt free with Normally Closed/Normally Open contacts. 
                                                Default factory set to Normally Closed mode.)