H-10 PRO Refrigerant Leak Detector

H-10 PRO Refrigerant Leak Detector
Ultra-sensitive universal refrigerant leak detector
  • Detects all CFC, HFC and HCFC refrigerants as low as 0.006 oz/yr, including R-410a and R-507
  • Dual power options allow battery operation for the best mobility or wall power for uninterrupted usage
  • Visual and audible indicators include an incremental flashing LED in the probe tip, an internal speaker and a
    headphone jack
The H-10 PRO is a highly responsive universal refrigerant leak detector using Bacharach’s tried-and-true heated 
diode sensor technology.  It’s ultra-sensitive to all halogen-based, non-flammable CFC, HFC and HCFC refrigerants
for reliable use in a wide range of refrigerant leak detection applications. In fact, it's the ac leak detector that 
technicians trust.
The H-10 PRO has a long probe (4.5 ft.) for detecting leaks in hard-to-reach areas, visual and audible indicators to 
show relative leak sizes and an auto-zeroing feature (automatic mode only) for finding leaks in backgrounds where
target gas is present. It has an internal sensor calibration reference to ensure optimum performance.
Refrigerants Detected [1]	        All CFC, HFC and HCFC refrigerants, including but not limited to: R-12, R-22, R-134a, 
R-404A, R-410A, R-502, R-507, HFO-1233zd, HFO-1234yf and HFO-1234ze

Sensitivity [2]			0.006 oz/yr (stationary) 0.1 oz/yr (moving per SAE J2791)

Response Time			1 second

Leak Indicators			Visual (red LED in probe tip) and audible (via internal speaker or headphones)

Automatic                           Yes, in automatic mode
Background Adjustment

Power					12 VDC internal rechargeable battery or via 100-240 VAC wall adapter/charger

Run Time				3 hours (typical) on fully-charged battery

Size (H x W x D)			Unit: 8.3 x 10.5 x 5.4 in. (21.1 x 26.7 x 13.7 cm)
                                        Probe: 4.5 ft. (1.37 m)

Weight				5.1 lbs. (2.3 kg)

Sensor Life [3]			1 year (typical)

Operating Conditions		32 to 104 °F (0 to 40 °C), 10 to 90% RH (non-condensing), 1 ATM

Warm-up Time			2 minutes (approximate)

Approvals				CE mark

Warranty				Instrument: 3 Years (Does not include sensor, battery, probe tip, airflow balls, filters 
or leak reference bottle.)

[1] DO NOT use this device to detect for leaks of refrigerants which are rated as combustible/ flammable gases
(e.g. ASHRAE A2- or A3- rated refrigerants). [2] Sensitivity for R-12, R-22, R-124a, R-410A, R-404A and R-507 when unit is set to small leak setting, manual mode. [3] Based on normal use. Consistent and/or constant exposure to high levels of refrigerant will deteriorate the sensor
life more quickly. Increasing the sensor heater will also impact sensor life.
Technical Library   Part Numbers   Accessories & Parts   Gas List


Visitors: 61,174