HOME > OUR PRODUCTS > Combustion Analyzer > ECA450

ECA450

ECA 450

 

A combustion efficiency and environmental analyzer

  • Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles
  • Sensors are easily replaced or upgraded in the field
  • Rugged suitcase design with large, easy-to-read display
  • Built-in printer for instant traceability and record-keeping

Description

 

The ECA 450 is an industrial grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning safely and efficiently.

The ECA 450 is designed for on-demand or semi-continuous sampling of industrial furnaces, boilers and other industrial combustion equipment. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030 and state/local protocols including SCAQMD.

Specifications

Measurements : 

O2
CO (low-range, H2 compensated)
CO (high-range, optional)
NO (optional)
NO2 (optional)
SO2 (optional)
Combustibles (optional)
Stack temperature
Primary/ambient air temperature

Draft/differential pressure

 

0 to 20.9%
0 to 4000 ppm
4001 to 80,000 ppm
0 to 3500 ppm
0 to 500 ppm
0 to 4000 ppm
0 to 5% vol. (application dependent)
-4 to 2400°F (-20 to 1215°C)
-4 to 999°F (-20 to 537°C)

27.7 inH2O(±69 mbar) 

 
Power Internal rechargeable battery or via supplied wall adapter
Run Time 8 hours minimum
Size (H x W x D) 13.5 x 18.5 x 9 in. (34.3 x 47.0 x 22.9 cm)
Weight 25 lb. (11.3 kg)
Fuels[1] Natural gas, coal, oil 2/4/5/6, wood, kerosene, bagasse, propane, LPG, KOKS, LEG, biofuel
Operating Conditions Analyzer: 32 to 104 °F (0 to 40 °C), 15 to 90% RH (non-condensing), 1 ATM ± 10%
Probe tip[2]: 1472 °F (800 °C) maximum, 10 inH2O (25 mbar) maximum draft
Warm-up Time 60 seconds
Memory 1000 locations
Communications RS-232
Approvals CE mark
Warranty 1 years (including sensors)

 

[1] Depending upon combustion equation type – see manual for details

[2] For standard 12 in. probe, P/N 0024-3023

Visitors: 76,497